Vol 6, No 2 (2022)

Jurnal Sistem Mekanik dan Termal (METAL)

Table of Contents

Articles

Tool life in Turning Processes: Effect of Lubricants with a small amount of Graphite as Cutting Fluid

Agus Sutanto (Universitas Andalas, Padang, West Sumatera, Indonesia)
Ismet Hari Mulyadi (Universitas Andalas, Padang, West Sumatera, Indonesia)
Farchan - Vernando (Universitas Andalas, Padang, West Sumatera, Indonesia)

StatisticsThis article has been read 128 times.
PDF
69-76

Test Performance of Plastic Waste Shredder Machine and Analyze the Quality of the Shredded Plastic Product Using the Taguchi Method

Adam - Kamil (Universitas Sultan Ageng Tirtayasa, Banten, Indonesia)
Hendra Hendra (Universitas Sultan Ageng Tirtayasa, Banten, Indonesia)
Sidik Susilo (Universitas Sultan Ageng Tirtayasa, Banten, Indonesia)
Erny Listijorini (Universitas Sultan Ageng Tirtayasa, Banten, Indonesia)
Hernadewita Hernadewita (Universitas Mercubuana, Jakarta, Indonesia)

StatisticsThis article has been read 232 times.
PDF
77-83

The Effect of the Gap Spark Plug Electrode to The Performance of Motorcycle GL 200 D

Riza Muharni (Universitas Muhammadiyah Sumatera Barat)
Ade Ari Agasi (Universitas Muhammadiyah Sumatera Barat)
Muchlisinalahuddin Muchlisinalahuddin (Universitas Muhammadiyah Sumatera Barat)
Dytchia Septi Kesuma (Universitas Muhammadiyah Sumatera Barat)
Ade Usra Berli (Universitas Muhammadiyah Sumatera Barat)

StatisticsThis article has been read 85 times.
PDF
84-88

Design and Manufacture Indirect Method Grain Bed Dryer with 10 Kg Capacity Fueled by Wasted Oil

Rizki Cakrawiguna (Institut Teknologi Nasional Bandung)
Noviyanti Nughraha (Institut Teknologi Nasional Bandung)
Nuha Desi Anggraeni (Institut Teknologi Nasional Bandung) Orcid ID

StatisticsThis article has been read 69 times.
PDF
89-94

Addition of Zirconium Oxide for Reduction of Hydroxyapatite Layer Cracks in Ti-6Al-4V ELI Implant Materials for Improved Osseointegration

Sanny Ardhy (Universitas Dharma Andalas)
Gunawarman Gunawarman (Universitas Andalas)
Jon Affi (Universitas Andalas)
Yuli Yetri (Politeknik Negeri Padang)

StatisticsThis article has been read 55 times.
PDF
95-101

An Effect of Biocomposite Composition and Material on Brake Pad Wear

Yuniarto Agus Winoko (Politeknik Negeri Malang)
Achmad Dhani Audi Pratama (Politeknik Negeri Malang)
Umi Anis Ro'isatin (Politeknik Negeri Malang)

StatisticsThis article has been read 67 times.
PDF
102-106

Improve TAT Refurbishment Process Excavator 20 Tons in Heavy Equiment Workshop

Refnal Marzuki (Politeknik Negeri Padang)
Rino Sukma (Politeknik Negeri Padang)
Nofriyandi R (Politeknik Negeri Padang)
Rusmardi Rusmardi (Politeknik Negeri Padang)

StatisticsThis article has been read 88 times.
PDF
107-116

The Effect of Additional TiO2 Nanofluid on Heat Transfer Rate and Thermal Resistance on Processor Cooling with Ultrasonic Vibration

Dhiya'ul Ro'id Alfaris (Politeknik Negeri Malang)
Sudarmadji Sudarmadji (Politeknik Negeri Malang)

StatisticsThis article has been read 38 times.
PDF
117-125

Mold Strength Analysis of Press Machine Composite Brake Using FEM Method on Train Brakes

Andhika Muhammad Kasyafa (Institut Teknologi Nasional Bandung)
Muhamad Juan Raffindo (Institut Teknologi Nasional Bandung)
Nuha Desi Anggraeni (Institut Teknologi Nasional Bandung) Orcid ID

StatisticsThis article has been read 45 times.
PDF
126-131

Study of Improving Fracture Toughness of Un-Saturated Polyester with Addition of Mixing Percentage of CPO Oils

Nusyirwan Adnand (Andalas University)
Ilham S (Andalas University)

StatisticsThis article has been read 88 times.
PDF
132-137

Innovation for Making Portable Induction Furniture as a Solution for System Waste Handling Post-vaccination COVID-19 Vaccine

Ridwan Abdurrahman (Universitas Muhammadiyah Riau)
Ahmad Kafrawi Nasution (Universitas Muhammadiyah Riau)
Ayub Satria (Universitas Muhammadiyah Riau)

StatisticsThis article has been read 141 times.
PDF
138-142