An Effect of Biocomposite Composition and Material on Brake Pad Wear



DOI: https://doi.org/10.25077/metal.6.2.102-106.2022

Author(s)

Yuniarto Agus Winoko (Politeknik Negeri Malang)
Achmad Dhani Audi Pratama (Politeknik Negeri Malang)
Umi Anis Ro'isatin (Politeknik Negeri Malang)

Abstract


Asbestos material which is widely used in brake pad friction material is carcinogenic is harmful to long term health. The method of making brake pads is by mixing the basic ingredients of brake linings from nature in the form of bamboo powder and bagasse ash with different percentages of mixtures of 25% bamboo powder, 35% bagasse ash and 40% polyurethane sample coded A. 35% bamboo powder , 25% bagasse ash and 40% polyurethane sample coded B. While 45% bamboo powder, 15% bagasse ash and 40% polyurethane sample coded C. Using compression molding with a compressive force of 14.709 N. The highest average hardness is 77, 4 HD was obtained on the brake lining coded A with the ratio of a mixture of 25% bamboo powder, 35% bagasse ash and 40% polyurethane. While the lowest average hardness value of 70.6 HD was obtained on brake pads with code C with a mixture ratio of 35% bamboo powder, 25% bagasse ash and 40% polyurethane.

Full Text:

PDF

References


L. Rina, and Sunardi, "Study Experimental Influence Size Particle Bamboo Powder on Mechanical Properties Composite For Application Motorcycle Brake Pads." National Journal ISSN 2407-7852. Volume II, No. 2, pp.54-63, 2016.

I. S. Bluedi and M. Hartono, "Influence Composition and Temperature of Biocomposite Materials Against the Performance of Non-Asbestos Brake Pads." National Journal of Energy and Technology Manufacturing, Vol. 05, No. 01, pp.29-34, 2022.

I. Scout, "Brake Pad Using Variation Mixed 50, 60, 100 Silicon (Al-Si) Aluminum Mesh Granules With Teak Wood Powder Against Hardness, Wear, and Coefficient Values Swipe." Journal Scientific Mechanical Engineering Vol. 21, No. 1, pp. 35-45, 2020.

Aminur and M. Hasbi, "Manufacturing Process Biocomposite Polymer Fiber For Application Brake Pads." ISSN: 2407 – 1846, pp.1-7, 2015.

P. Bead, and Samuel, "Analysis of Tensile Strength and Strength flex Beam Laminate Combination of Petung Bamboo and Apus Bamboo for Component Wooden Ship." National Journal of SHIP. Vol. 13, No. 3, pp. 142-151, 2016 .

H. Harianto and M. Devana, "The Effect of Sugarcane Bagasse As Pozzolan in Mixtures Normal Concrete And Concrete Uhcp To Strong Press and be strong flexible concrete. " Journal Civil Engineering Science. Vol. 22 No. 2, pp. 151-156, 2016.

K. Siti and M. Farid, "Characterization of Physical Properties and Mechanical Properties Polyurethane Composite / Bamboo Powder As Car Door Panel Application." Journal of ITS Engineering, Vol.5, No. 2, pp. 153-155, 2016.


StatisticsArticle Metrics

This article has been read : 133 times
PDF file viewed/downloaded : 48 times

Copyright (c) 2022 Achmad Dhani Dhani

 


View METAL's Stats

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.