Development of Control System for TU-2A CNC Machine
DOI:
https://doi.org/10.25077/metal.10.1.43-54.2026Abstract
This study aims to design and develop an electronic control system for the TU-2A CNC machine to improve its performance, simplify the programming process, and facilitate machine maintenance and repair procedures. The method used is retrofitting the EMCO TU-2A CNC machine by replacing the old electronic components with more modern and affordable components, without compromising the machine's precision. Calibration is carried out to ensure the accuracy of the machine's movement, while machine testing is conducted by machining workpieces made of teflon (PTFE) and aluminum. The results of the study indicate that after the development and maintenance, the CNC TU-2A machine showed improvements in precision and ease of use. The machine's error remains within the tolerance limit, approximately 0.01 to 0.02 mm, indicating that the calibration was successful. The conclusion of this study is that the development of the new electronic control system has made the CNC TU-2A machine more efficient and easier to maintain, making it more suitable for use in vocational education.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Ariawan Bayu Wicaksono, Lewi, Muh. Abdillah, Nurhidayanti, Ishak
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Please find the rights and licenses in Jurnal Sistem Mekanik dan Termal (METAL).
1. License
Public use of the works published in this journal is bound to the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. In previous editions, our articles included incomplete licensing information. In the recent editions, we have corrected this to align with the appropriate license, the CC BY-NC-SA.
2. Author(s)' Warranties
The author(s) warrants that the article is original, written by the stated author(s), has never been published in any form anywhere before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third-party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).
3. User Rights
METAL is actively supporting open access and open science initiatives; thus, METAL is disseminating articles published as freely as possible. Under the Creative Commons license, METAL permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and METAL when distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in future own works, including lectures and books,
- the right to reproduce the article for own purposes,
- the right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, by submitting his/her articles to METAL, it warrants that he/she has been authorized by all co-authors and agrees to inform his/her co-authors. Any internal disputes between authors will have to be cleared by themselves, and METAL will be notified of the result. METAL held no responsibilities whatsoever should any disputes arise and was freed from any responsibilities relating to the matter.
6. Miscellaneous
METAL will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and METAL has become obligated to have the article published. METAL may adjust the article to a style of punctuation, spelling, capitalization, referencing, and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible, and such access will be free of charge for the readers.
