Designing CVT Slide Piece Molds for Cavity 24 Pieces on Injection Molding Machine



DOI: https://doi.org/10.25077/metal.8.2.56-62.2024

Author(s)

Alfan Ekajati Latief (Institute Teknologi Nasional Bandung)
M. Pramuda Nugraha S. (Institute Teknologi Nasional Bandung)
Adimas Prasetyo S. (Institute Teknologi Nasional Bandung)
Ramdan Prianto (Institute Teknologi Nasional Bandung)
Sarmada Sarmada (Institute Teknologi Nasional Bandung)
Laode Mochamad Irfan (Institute Teknologi Nasional Bandung)

Abstract


Composite materials are often used in the industrial world, one of which is in the automotive industry. Material composite based on polypropylene high impact (PPHI) and natural fiber can be used to create slide piece components on the CVT of automatic motor vehicles. In this study, we will design molds from injection molding on an industrial scale en masse, producing a slide piece product made from composite materials. This research is a development of the previous injection molding mold. In the study, the solidworks software will compare three types of multi-cavity, namely circular, series, and parallel, to get more efficient and effective molds. This multi-cavity type is designed to print PPHI material and pineapple fiber with a volume fraction of 20% and a mesh of 170. The mold material designed is made of stainless steel 2316 for cavity and core parts with a size of 180mm x180mm. Using simulation plastic on solidworks, the simulation results obtained a type of circular type that can be applied to injection machine molds because it has the most effective pressure value of 4.8 MPa and its geometric shape. Then obtained a fill time of 1,89s and volumetric shrinkage at the end of fill at a max of 17.56%, which is more efficient.

Keywords


Injection Molding, Slide Piece, Polypropylene High, Solidworks, Pineapple Fiber, Impact,

Full Text:

PDF

References


Pramuko I Purboputro., 2006. “Pengaruh Panjang Serat Terhadap Kekuatan Impak Komposit Enceng Gondok Dengan Matriks Poliester,”.

A. E. Latief. et al., 2019. “Karakterisasi Mekanik Komposit Matriks Polipropilena High Impact Dengan Serat Alam Acak Dengan Metode Hand Lay Up Untuk Komponen Automotive,” Jurnal Rekayasa Hijau, Vol. 3, No. 3,.

A. E. Latief. et al., 2021. “Metal: Jurnal Sistem Mekanik Dan Termal Perancangan Cetakan Injection Molding Hand Press Untuk Produk Slide Piece Cvt Menggunakan Fem,”.

N. Desi A. et al., 2020. “Seminar Nasional-Xix Analisis Bending Pada Komposit Pphi (Polypropylene High Impact) Berpenguat Serat Nanas Dengan Fraksi Volume 20% Yang Dibuat Menggunakan Injection Molding,” Pp. 1–5, Dec.

H. Fahmi And H. Hermansyah, 2011. “Pengaruh Orientasi Serat Pada Komposit Resin Polyester/ Serat Daun Nenas Terhadap Kekuatan Tarik,”. [Online]. Available: Www.En.Wikipedia.Org/Composite

I. Mawardi And D. Hanif, 2015. “Analisis Kualitas Produk Dengan Pengaturan Parameter Temperatur Injeksi Material Plastik Polypropylene (Pp) Pada Proses Injection Molding,”.

H. Widiastuti. et al., 2019. “Identifikasi Cacat Produk Dan Kerusakan Mold Pada Proses Plastic Injection Molding,”. [Online].Available: Http://Jurnal.Polibatam.Ac.Id/Index.Php/Jatra,Https://Jurnal.Polibatam.Ac.Id/Index.Php/Jatra

L. Khoirul Miftakhul N. et al., 2017. Muhammadiyah Yogyakarta Jl Lingkar Selatan Tamantirto, “Desain Dan Optimasi Injection Mold Sistem Slider Pada Produk Preform Stick T15,” Jurnal Rekayasa Mesin, Vol. 8, No. 3, Pp. 155–165.

R. Muhammad K. et al., 2022, “Perancangan Bracket Cetakan Dan Simulasi Injection Molding Untuk Komponen Slide Piece Cvt,” Vol. Vol.02no. 01, No. April 2022, Pp. 74–82.

L,.Alfan E., et al., 2022, Perancangan Cetakan Injection Molding Handpress Material Komposit Pphi Dan Serat Alam, Vol. Vol. 8no. 2, No. Jurnal Teknik Mesin, Pp. 2502–2040.

R. Salam. et al. 2016, “Pengaruh Penggunaan Variasi Berat Roller Pada Sistem Cvt (Continuously Variable Transmission) Terhadap Performa Sepeda Motor Honda Beat 110cc Tahun 2009,”.

R.A.Anugrah,2021 “Troubleshooting Analysis Of Cvt (Continuously Variable Transmission) System On Honda Beat Motorcycles,” Motivation : Journal Of Mechanical, Electrical And Industrial Engineering, Vol. 4, No. 1, Pp. 1–8, Doi: 10.46574/Motivation.V4i1.98.

Sumarji, 2011, “Studi Perbandingan Ketahanan Korosistainless Steel Tipe Ss 304 Dan Ss 201 Menggunakan Metode U-Bend Testsecara Siklik Dengan Variasi Suhu Dan Ph,” Rotor, Vol. Volume 4, Pp. 1–8.

S. Anggoro. et al., T. Mesin, V. Universitas, M. Yogyakarta, J. Lingkar Selatan, 2017, “Seminar Nasional Mesin Dan Industri (Snmi Xi) 2017 Riset Multidisiplin Untuk Menunjang Pengembangan Industri Nasional Lombok,”.

T. Kimerling. 2002, "Injection Molding Cooling Time Reduction And Thermal Stress Analysis."

H. Sanjaya And N. Desi Anggraeni, 2017,“Pengaruh Temperatur Cetakan Komposit Matriks Polypropylene High Impact (Pphi) Berpenguat Serat Nanas Terhadap Cacat Shringkage Dan Sink Mark Menggunakan Solidworks.”

J. Pearson, 2021, “Atlas Quality Management Scope: National Doc: Information Notice Stainless Steel 420 Grade Data Sheet,”.


StatisticsArticle Metrics

This article has been read : 0 times
PDF file viewed/downloaded : 0 times

Copyright (c) 2024 Laode Mochamad Irfan

 


View METAL's Stats

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.