Effect of Tool Diameter and Feeding Speed on Surface Roughness in the AISI 1045 Steel Milling Process



DOI: https://doi.org/10.25077/metal.7.2.31-35.2023

Author(s)

Iswanto Iswanto (Universitas Muhammadiyah Sidoarjo)

Abstract


This paper discusses how the influence of the tool diameter on the surface roughness of the workpiece, how the effect of feeding speed on the surface roughness of the workpiece and whether there is an interaction between the tool diameter and feeding speed on the workpiece surface roughness in the AISI 1045 steel milling process. Variables that are varied in this study were the tool diameter, namely 6 mm, 8 mm, and 10 mm and the variation of feeding speed used was 33.5 mm/min, 59.4 mm/min and 111.9 mm/min. After the AISI 1045 steel milling process by varying the specified parameters, and then the surface roughness test of the workpiece is carried out. From the results of research that has been done, it can be concluded that, tool diameter and feeding speed together have a significant effect on the surface roughness of the workpiece in the AISI 1045 steel milling process.

Keywords


Surface Roughness; AISI 1045 Steel; Feeding Speed; Milling Process; Tool Diameter

Full Text:

PDF

References


M. T. Hayajneh, M. S. Tahat, J. Bluhm, “A study of the effects of machining parameters on the surface roughness in the end milling process,” Jordan Journal of Mechanical and Industrial Engineering, vol. 1, no. 1, pp. 1-5, Sep. 2007.

W. Bouzid, A. Zghal, and L. Saï, “Taguchi method for design optimisation of milled surface roughness,” Materials Technology, vol. 19, no. 3, pp. 159-162, 2004.

doi: 10.1080/10667857.2004.11753079

N. V. Dhandapani, V. S. Thangarasu, and G. Sureshkannan, “Investigation on effect of material hardness in high speed CNC end milling process,” The Scientific World Journal, pp. 1-6, 2015.

Ö. Taga, Z. Kiral, and K. Yaman, “Determination of cutting parameters in end milling operation based on the optical surface roughness measurement,” International Journal of Precision Engineering and Manufacturing, vol. 17, no. 5, pp. 579-589, 2016.

Iswanto, M. F. Firmansyah, and Mulyadi, “Effect of the cutting angle and the depth of cut toward wear of carbide tool on the lathe,” Journal of Physics: Conference Series, vol. 1594, 2020.

doi:10.1088/1742-6596/1594/1/012027

J. T. Black, and R. A. Kohser, “De Garmo's materials and processes in manufacturing,” John Wiley & Sons, 2017.

J. Z. Zhang, J. C. Chen, and E. D. Kirby, “Surface roughness optimization in an end-milling operation using the Taguchi design method,” Journal of Materials Processing Technology, vol. 184, no. 1-3, pp. 233-239, 2007.

V. D. Patil, S. P. Kamble, and S. T. Bagde, “Analysis on multi objective optimization of CNC end milling machining parameters of (Al 2024-T4),” Journal of Emerging Technologies and Innovative Research (JETIR), vol. 2, no. 3, pp. 728-732, 2015.

E. M. Trent and P. K. Wright, Metal Cutting, 3rd Edition, Butterworth Heinemann, Boston, 2000.

M. T. Demirci, I. Asilturk, and E. Canli, “Surface roughness optimization of milling process of AISI 1045 steel with Taguchi technique,” Journal of Selçuk University Natural and Applied Science, vol. 2, no. 4, pp. 10-20, 2013.

O. S. Joshua, M. O. David, and I. O. Sikiru, “Experimental investigation of cutting parameters on surface roughness prediction during end milling of aluminium 6061 under MQL (Minimum Quantity Lubrication),” Journal of Mechanical Engineering and Automation, vol. 5, no. 1, pp. 1-13, 2015.

M. T. Hayajneh, and M. Abdellahia, “Prediction performance of end-milling process by gene expression programming,” Jordan Journal of Mechanical and Industrial Engineering, vol. 13, no. 2, pp. 83-89, 2019.

F. Cus, U. Zuperl, and V. Gecevska, “High speed end-milling optimization using particle swarm intelligence,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 22, no. 2, pp. 75-78, 2007.

K. Kadirgama, M. M. Noor, and M. M. Rahman, “Optimization of surface roughness in end milling using potential support vector machine,” Arabian Journal for Science and Engineering, vol. 37, no. 8, pp. 2269-2275, 2012.

N. Agarwal, “Surface roughness modeling with machining parameters (speed, feed & depth of cut) in CNC milling,” MIT International Journal of Mechanical Engineering, vol. 2, no. 1, pp. 55-61, 2012.

B. S. Prasad, and M. M. Sarcar, “Analysis of face milling operation using acousto optic emission and 3D surface topography of machined surfaces for in-process tool condition monitoring,” Jordan Journal of Mechanical and Industrial Engineering, vol. 5, no. 6, pp. 509-519, 2011.

W. K. Hamdan, J. H. Mohamed, and N. H. Obaeed, “Influence of some relevant process parameters on the surface roughness of surfaces produced by ISMF proce,” Engineering and Technology Journal, vol. 32, no. 8, pp. 1942-1957, 2014.

A. H. Setyawan and Iswanto, “Pengaruh putaran spindel dan cairan pendingin terhadap kekasaran permukaan baja AISI 4140 pada proses pembubutan,” R.E.M (Rekayasa Energi Manufaktur) Jurnal, vol. 4, no. 1, pp. 1-15, 2019.

doi: 10.21070/r.e.m.v4i1.2629

T. Kıvak, “Optimization of surface roughness and flank wear using the Taguchi method in milling of hadfield steel with PVD and CVD coated inserts,” Measurement, vol. 50, pp. 19-28, 2014.

M. Shnfir, O. A. Olufayo, W. Jomaa, and V. Songmene, “Machinability study of hardened 1045 steel when milling with ceramic cutting inserts,” Materials, vol. 12, no. 23, p. 3974, 2019.

B. Bhardwaj, R. Kumar, and P. K. Singh, “Effect of machining parameters on surface roughness in end milling of AISI 1019 steel,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 228, no. 5, pp. 704-714, 2013.

N. H. Obaeed, M. A. Abdullah, M. Muath, M. Adnan, and H. Amir, “Study the effect of process parameters of CNC milling surface generation using al-alloy 7024,” Diyala Journal of Engineering Sciences, vol. 12, no. 3, pp. 103-112, 2019.

I. Korkut, and M. A. Donertas, “The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool–chip contact length during face milling,” Materials & Design, vol. 28, no. 1, pp. 308-312, 2007.

S. Yazdi, A. Khorram, “Modeling and optimization of milling process by using RSM and ANN methods,” International Journal of Engineering and Technology, vol. 2, no. 5, pp. 474-480, 2010.


StatisticsArticle Metrics

This article has been read : 77 times
PDF file viewed/downloaded : 24 times

Copyright (c) 2023 Iswanto Iswanto

 


View METAL's Stats

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.