Evaluasi Frame Sepeda saat Tabrakan Dengan Metode Ekplisit Elemen Hingga

Authors

  • Ardi Wiranata Universitas Gadjah Mada
  • Abdul Arief PT. Indonesia Epson Industry
  • Heru Santoso Budi Rochardjo Universitas Gadjah Mada

DOI:

https://doi.org/10.25077/metal.3.1.29-39.2019

Keywords:

Energi Tabrakan, Frontal Impact, Komposit, FEA

Abstract

In this paper, numerical method of crash impact by using explicit dynamic model was used to evaluate the bike frame design. Frontal impact simulation model was carried out to understand the characteristics of energy absorption, stress distribution and deformation of the bike frame. Carbon fiber T300 composite with elasticity modulus 129,79 GPa and overall frame weight is 1,8 kg was used in this simulation as material properties. Hashin damage criteria was used in this numerical analysis since this criteria was widely used to assess composite material damage simulation. In this study Head Tube angle (HTA) and Top Tube Angle (TTA) was modified. The modified HTA was varied from 69O to 76O and TTA was 70O to 86O. This modification was based on the original frame design which the HTA and TTA are 71.5O and 74O respectively. This modification was aimed to find the effect of HTA and TTA modification to energy absorption and stress distribution in the bike frame design. Simulation result shows that TTA and HTA modification affect the energy absorption of the bike frame. The smaller the energy absorption of the bike frame shows that the frame has poor quality of stress distribution.

References

Yehia. A., Abdel-nasser, “Frontal Crash Simulation of Vehicles Against Lighting Columns using FEM,†Alexandria Engineering Journal, vol. 52, no 3, pp. 295–299, 2013, https://doi.org/10.1016/j.aej.2013.01.005.

Junaidi, Taufik, “Proses Manufaktur Sepeda Balap dari Bahan Serat Karbon dengan Metode Wraped on Foam,†Yogyakarta, Indonesia: Universitas Gadjah Mada, 2016

Lin, C. C., Huang, S. J., Liu, C. C. , “Structural Analysis and Optimization of Bicycle Frame Designs,†Advances in Mechanical Engineering,vol 9, no 12, pp. 1–10, 2017, https://doi.org/10.1177/1687814017739513

Duarte A.P.C., A. Diaz Saez, N. Silvestre, “Comparative Study Between XFEM and Hashin Damage Criterion Applied to Failure of Composites,†Elsevier:Thin-Walled Structures, no 115, pp.277-288, 2017, https://dx.doi.org/10.1016/j.tws.2017.02.020

P.J. Benjamin Hasseldine, Chao Gao, Yaning Li, “Prediction of The Anisotropic Damage Evolution of Dry Common Millet (Panicum Miliaceum) Seed Under Quasi-Static Blunt Indentation,†Elsevier:Engineering Fracture Mechanics, no 214, pp.112-122, 2019, https://doi.org/10.1016/j.engfracmech.2019.03.042

Zhang, M., “Compressive Strength Determined for Ultrahigh Modulus Fiber Reinforced Composites by [ 90 / 0 ] ns Laminates,†Elsevier: Composite Structures, no 191, pp. 24–35, 2018, https://doi.org/10.1016/j. compstruct. 2018.02.033

Downloads

Published

2019-07-08

How to Cite

Wiranata, A., Arief, A., & Budi Rochardjo, H. S. (2019). Evaluasi Frame Sepeda saat Tabrakan Dengan Metode Ekplisit Elemen Hingga. METAL: Jurnal Sistem Mekanik Dan Termal, 3(1), 29–39. https://doi.org/10.25077/metal.3.1.29-39.2019

Issue

Vol. 3 No. 1 (2019)

Section

Articles

License

Please find the rights and licenses in Jurnal Sistem Mekanik dan Termal (METAL).

1. License

Public use of the works published in this journal is bound to the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. In previous editions, our articles included incomplete licensing information. In the recent editions, we have corrected this to align with the appropriate license, the CC BY-NC-SA.

2. Author(s)' Warranties

The author(s) warrants that the article is original, written by the stated author(s), has never been published in any form anywhere before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third-party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).

3. User Rights

METAL is actively supporting open access and open science initiatives; thus, METAL is disseminating articles published as freely as possible. Under the Creative Commons license, METAL permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and METAL when distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • the right to use the substance of the article in future own works, including lectures and books,
  • the right to reproduce the article for own purposes,
  • the right to self-archive the article.

5. Co-Authorship

If the article was jointly prepared by other authors, by submitting his/her articles to METAL, it warrants that he/she has been authorized by all co-authors and agrees to inform his/her co-authors. Any internal disputes between authors will have to be cleared by themselves, and METAL will be notified of the result. METAL held no responsibilities whatsoever should any disputes arise and was freed from any responsibilities relating to the matter.

6. Miscellaneous

METAL will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and METAL has become obligated to have the article published. METAL may adjust the article to a style of punctuation, spelling, capitalization, referencing, and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible, and such access will be free of charge for the readers.