Manufacturing Induction Heating Based on Helical Coil Method by Using Arduino Mega 2560
DOI:
https://doi.org/10.25077/metal.8.1.%25p.2024Keywords:
corrosion, induction heating, Arduino, boltsAbstract
Galvanic corrosion is a type of corrosion that often occurs in aircraft structures. This type of corrosion occurs because two different types of materials contact each other through an electrolyte media. As a result of this galvanic corrosion, several components in the aircraft structure can be damaged. One example of this damage is the corrosion of the bolts on the aircraft skin. So that makes it difficult to remove from the skin. One way to loosen the bolts due to galvanic corrosion is by heating. By using induction heater to the component, the rusty bolt can be loosened. The heat generated causes the bolt to stretch and break the corrosion and so that the bolt or nut can be opened easily. In this research, by using an Arduino Mega 2560 model to remove bolts and nuts with an open loop and closed loop system was conducted. Arduino Model as a microcontroller which is needed to run a program. The specimens of the bolts are using steel bolts grade 8.8 with key sizes 13, 17, and 19. The temperature to produce induction heater is set to a temperature of 150 °C. The results show that to reach 150 oC each of the key size its produce a different duration of time. Key size 13 took 190 seconds with 35.64 watts of power, key size 17 took 279 seconds with 36.96 watts power and the 19 key took 296 seconds with 41.43 watts power.
References
Y. Zhulkarnaen, Perancangan dan Pembuatan Pemanas Induksi dengan Metode Pancake Coil Berbasis Mikrokontroller ATmega 8535, 2013.
M. F. Hakiki and D. Riandadari, Rancang Bangun Sistem Induction Heater Berbasis Mikrokontroller ATmega 328, vol. 4, no. 3, 2018.
Iryani, L., Aldof, S. Finite Element Method Analysis in Simulation of Induction Heater Using Helical Coil Method, Jurnal Sistem Mekanik dan Termal - Vol. 7 No. 1 (2023), pp. 23-26, ISSN (Print) 2598-1137.
Steinel America Inc., [Online]. Available: https://www.steinel.net/Professional-Heat-guns.
Yu-Lin Lee, Chang-Hua Lin and Hwa-Dong Liu, A Novel MPPT Heating Control Strategy Applied to the Induction Heating System, 2022, 10, 1151. https://doi.org/10.3390/pr10061151.
Aircraft Hardware. Aviation Maintenance Technician Handbook - General, 7th ed., Administration, Federal Aviation., U.S. Department of Transportation., Oklahoma City, U.S, 2018, pp. 7-37.
Corrosion Control for Aircraft, Vols. AFS-30, 43-4B, Advisory Circular. Administration, Federal Aviation., pp. 2-1.
Handbook of Induction Heating, New York: Marcel Dekker Inc., 2003. ISBN 0-8247-0848-2.
Wahyu Budiarto, Arif dan Syafei Gozali, M., Rancang Bangun Pemanas Induksi dengan Metode Multiturn Helical Coil, Batam: Politeknik Negeri Batam, 2019.
Budynas, Richard G. and Nisbett, J. Keith, Shigley's Mechanical Engineering Design, 10th Edition. New York: McGraw-Hill Education, 2015. NY 10121.
Downloads
Published
How to Cite
Issue
Section
License
Please find the rights and licenses in Jurnal Sistem Mekanik dan Termal (METAL).
1. License
Public use of the works published in this journal is bound to the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. In previous editions, our articles included incomplete licensing information. In the recent editions, we have corrected this to align with the appropriate license, the CC BY-NC-SA.
2. Author(s)' Warranties
The author(s) warrants that the article is original, written by the stated author(s), has never been published in any form anywhere before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third-party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).
3. User Rights
METAL is actively supporting open access and open science initiatives; thus, METAL is disseminating articles published as freely as possible. Under the Creative Commons license, METAL permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and METAL when distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in future own works, including lectures and books,
- the right to reproduce the article for own purposes,
- the right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, by submitting his/her articles to METAL, it warrants that he/she has been authorized by all co-authors and agrees to inform his/her co-authors. Any internal disputes between authors will have to be cleared by themselves, and METAL will be notified of the result. METAL held no responsibilities whatsoever should any disputes arise and was freed from any responsibilities relating to the matter.
6. Miscellaneous
METAL will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and METAL has become obligated to have the article published. METAL may adjust the article to a style of punctuation, spelling, capitalization, referencing, and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible, and such access will be free of charge for the readers.
