Thermal Stress Analysis for Barrel and Screw Component in The Plastic Waste Machine Using Finite Element Method
DOI:
https://doi.org/10.25077/metal.7.2.1-7.2023Keywords:
Plastic Processing Machines, Barrel, Screw, Material, Stress, FEMAbstract
Plastic waste causes negative impacts for environmental such as air pollution, water pollution, and others. To solve this problem, a plastic processing machine was made. Barrels and screws are the most important components of this machine. Aims in this study to find maximum thermal stress for the barrel and screw component in the plastic waste machinery with temperatures operation 260 0C and variation material. Finite element method are used to simulate and show that the results for the barrel using alloy steel has a maximum von Mises stress of 618,292 MPa. Â For displacement, this alloy steel material also has a maximum displacement of 0.612 mm. For the screw material used by using AISI 4340 Steel has a maximum von Mises stress of 849.997 MPa and the maximum displacement of 0.673 mm. It can be said that this material is still safe when used for barrels and screws component in the plastic waste machine processing.References
Borche, M. (2006). "Plastic Injection Molding Machine Components." Journal of Engineering and Applied Sciences, 1(3), 35-40.
Fujimoto, Y., Nakamura, T., Kojima, Y., & Koyama, H. (2019). Analysis of temperature distribution in a barrel of the plastic processing machine. Journal of the Society of Materials Science, Japan, 68(5), 225-230.
Hansson, S. (2001). "Hydraulic Systems in Plastic Injection Molding." Journal of Manufacturing and Material Processing, 1(3), 35-40.
Zhou, H., Guo, S., & Wang, Z. (2019). Research progress of recycled plastics in injection molding. Journal of Materials Science and Technology, 35(12), 1405-1417.
Agung Prabowo, Sigit, 2010, Easy To Use SolidWorks 2009, penerbit Andi Publisher, Yogyakarta.
Kosmala, J. (2006). "The Barrel Design in Plastic Injection Molding." Journal of Applied Sciences, 2(6), 35-40.
Gustafsson, P. (2003). "Mold Design in Plastic Injection Molding." Journal of Engineering and Applied Sciences, 1(2), 45-50.
Perdana, F.S., Akbar, A., & Mahmudi, H. (2022, November). Analisa Kekuatan Material Bahan dan Rangka Alat Pengguling Sapi Berbobot 1.2 Ton Menggunakan Software Autodesk Inventor. In: Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi) (Vol. 6, No.3, pp. 146-151).
Downloads
Published
How to Cite
Issue
Section
License
Please find the rights and licenses in Jurnal Sistem Mekanik dan Termal (METAL).
1. License
Public use of the works published in this journal is bound to the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. In previous editions, our articles included incomplete licensing information. In the recent editions, we have corrected this to align with the appropriate license, the CC BY-NC-SA.
2. Author(s)' Warranties
The author(s) warrants that the article is original, written by the stated author(s), has never been published in any form anywhere before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third-party rights, and that any necessary permissions to quote from other sources have been obtained by the author(s).
3. User Rights
METAL is actively supporting open access and open science initiatives; thus, METAL is disseminating articles published as freely as possible. Under the Creative Commons license, METAL permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and METAL when distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- the right to use the substance of the article in future own works, including lectures and books,
- the right to reproduce the article for own purposes,
- the right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, by submitting his/her articles to METAL, it warrants that he/she has been authorized by all co-authors and agrees to inform his/her co-authors. Any internal disputes between authors will have to be cleared by themselves, and METAL will be notified of the result. METAL held no responsibilities whatsoever should any disputes arise and was freed from any responsibilities relating to the matter.
6. Miscellaneous
METAL will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and METAL has become obligated to have the article published. METAL may adjust the article to a style of punctuation, spelling, capitalization, referencing, and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible, and such access will be free of charge for the readers.
